Fire Damage Restoration Dania
Fire and Flood Restoration

Fire and Flood Restoration in DANIA, Florida

Fire and Flood Restoration in DANIA, Florida means one crew handles both the burn damage and the water left by the hoses. We pull soot off framing, dry soaked drywall, and clear smoke odor from your HVAC before mold sets in. If you searched for fire and water damage restoration DANIA Florida at 2 a.m., we answer and roll.

Service overview

What Fire and Flood Restoration in DANIA, Florida covers

Fire and Flood Restoration in DANIA, Florida is the combined cleanup and rebuild of a home or business hit by fire and then soaked by the water used to put it out. The two problems have to be handled together, because the water keeps damaging framing, insulation, and drywall while everyone is focused on the char. We start with a thermal imaging camera and moisture meter sweep to map where the water traveled, then set drying equipment before soot work begins. In DANIA, most calls come from kitchen grease fires, electrical failures in older wiring, and attic fires that soak the ceiling below. Salt air off the Intracoastal and year-round humidity mean wet drywall in this city can grow mold in 48 to 72 hours, faster than inland. That is why we treat fire and flood cleanup DANIA jobs as one timeline, not two separate visits, and why we bring drying gear on the first truck.

! Problems we solve

Smoke odor lingering in walls and HVAC

The smell returns every time humidity rises, and guests notice it before you do. Masking sprays make it worse by adding fragrance on top of soot particles.

Water damage from firefighting efforts

Water sits behind baseboards and under tile, and in Florida humidity mold can start within 48 to 72 hours. Drywall that could have been saved gets torn out.

Charred structural framing and electrical damage

Charred lumber loses strength, and fire-damaged wiring is a shock and re-ignition risk. Power cannot safely return until both are addressed.

Scope of work

What our fire and flood restoration includes

Every job starts with a written scope, and the items below are part of the standard package rather than add-ons. If something on your property falls outside it, we tell you before work begins and put it in writing.

  • 01

    Water extraction and drying

    Extractors pull standing water, then Dri-Eaz and Phoenix air movers and dehumidifiers run until moisture meter readings match dry standard. Daily readings are logged and shared with you and your adjuster.

  • 02

    Soot and char removal

    HEPA vacuuming, dry sponge cleaning, and removal of unsalvageable drywall and insulation. Structural framing is wire-brushed and sealed with fire-rated sealant where char cannot be fully removed.

  • 03

    Odor treatment and air cleaning

    Hydroxyl generators, thermal fogging, and air scrubbers with HEPA filters run until the smell test passes. Duct cleaning is included when the HVAC system pulled smoke during the fire.

  • 04

    Documentation and rebuild

    Photos, moisture readings, and Xactimate line items go to your insurer, and repairs follow once drying is verified. Drywall, insulation, paint, and trim are matched to the existing finish.

Why homeowners call us first

A fire leaves three problems behind: char, water, and odor. Handling them in the wrong order costs more and takes longer. Here is what changes when one crew owns the whole job.

Call for service

Equipment and standards we work to

Thermal imaging camera

Finds water hidden behind walls and ceilings without opening them, and confirms where fire traveled inside cavities.

Dri-Eaz and Phoenix air movers

Move air across wet surfaces to speed evaporation, paired with dehumidifiers to pull the moisture out of the room.

Hydroxyl generators and ozone

Neutralize smoke odor at the molecular level in occupied and unoccupied spaces, depending on the treatment.

HEPA vacuums and air scrubbers

Capture fine soot and ash particles so they do not settle back onto cleaned surfaces or spread through the house.

Local execution

DANIA sits on the water, and that shapes every job. Summer humidity here runs high enough that wet drywall can grow mold in 48 to 72 hours, faster than most of Broward County inland. Older homes near Downtown Dania Beach and Dania Beach Heights often have original wiring and smaller attic spaces, which is where we see a lot of electrical and attic fires. Newer construction around Dania Pointe and the Marina Mile corridor tends to be tighter, so smoke spreads through the HVAC system faster and duct cleaning becomes non-negotiable. We plan drying around the local climate rather than a generic schedule, and we check the weather before deciding whether to open a house up or keep it sealed with air scrubbers running. If you need same day fire and flood restoration DANIA service after a storm or a kitchen fire, call and give the address. We confirm arrival time on the phone and load drying equipment on the first truck, because a second trip two days later is how drywall gets thrown away.

How fire and flood restoration runs in DANIA

  • • Downtown Dania Beach
  • • Harbor Isles
  • • Dania Pointe
  • • Marina Mile

Before and after

Kitchen fire with water in the floor [ A grease fire charred the cabinets above the stove and the fire department left about two inches of water across the kitchen and into the hallway. Soot coated the ceiling, and the smell had already reached the bedrooms. ]
Attic fire in a Harbor Isles home [ The ceiling assembly was dried from below over five days, burned insulation was replaced, decking was checked for char, and the duct system was cleaned. Both bedrooms passed the smell test and repairs were finished in three weeks. ]
A fire truck drives through a flooded street in Buenos Aires, Argentina, during a storm.
Response time
Response time

Answered around the clock in DANIA

When a fire happens, we answer

Calls come in at all hours, and a person answers the phone rather than a machine. For DANIA addresses, a crew is typically on site within 90 minutes, and the first truck carries extraction equipment, air movers, and a dehumidifier so drying starts on the first visit instead of waiting for a second appointment. Crews run two to four technicians depending on the size of the loss, and the on-call rotation covers nights, weekends, and holidays. If you are searching for 24/7 fire and water damage restoration DANIA Florida service, that is what this is. We confirm an arrival window on the phone, and if something changes on the way, we call you rather than leaving you guessing. Board-up materials and a thermal imaging camera ride on every truck, so the assessment and the first stage of work happen together.

90min
Typical on-site arrival

What to expect, step by step

1

Emergency call and site check

You call, we ask what burned and whether the power is off, and a crew heads your way. On arrival we check for structural danger, shut off utilities if needed, and board up openings. This first visit usually takes 45 to 90 minutes and ends with a written scope.

2

Water extraction and drying setup

Standing water comes out first with extractors, then we set Dri-Eaz and Phoenix air movers plus dehumidifiers. A moisture meter reading is logged in every affected room. Drying typically runs 3 to 5 days, and we check readings daily rather than guessing.

3

Soot and char removal

Technicians in respirators HEPA-vacuum surfaces, then remove charred drywall and insulation with a drywall saw and pry bar. Structural framing gets wire-brushed and sealed with fire-rated sealant. This stage usually takes 1 to 3 days depending on how far smoke traveled.

What fire and flood restoration costs

Typical 2026 pricing in this area runs $3,500 to $18,000 for residential work, with most single-room jobs landing between $4,000 and $8,000. The number moves with square footage affected, how much drywall has to come out, and whether the HVAC system pulled smoke. We give you a written scope with line items before work starts, and we walk through what your insurance is likely to cover. If you are comparing professional fire and water damage restoration DANIA Florida quotes, ask each company for moisture readings and a written scope, not just a total.

01

Square footage affected

A single room is a different job than a whole floor. Drying equipment count, demolition volume, and material replacement all scale with the size of the affected area.

02

Water spread and drying time

Water that reached the subfloor or wall cavities adds days of drying and may require opening walls. Faster extraction on the first visit reduces both cost and demolition.

03

HVAC and odor treatment

If smoke entered the duct system, duct cleaning and extended odor treatment are needed. Skipping it saves money now and costs more when the smell returns.

Frequently asked questions

How much does fire and flood restoration cost in DANIA Florida?

Most residential jobs in this area run $3,500 to $18,000 in 2026, with the wide range driven by square footage affected and how much drywall has to come out. A single-room kitchen fire with limited water often lands near the low end. Whole-floor losses with attic involvement and HVAC contamination push toward the top. We provide a written scope before work starts so you can compare it to your insurance estimate.

Who does fire and water damage restoration near me in DANIA?

We do, and we handle both sides of the loss with one crew. Call (833) 929-6186 and describe what burned and where the water went. We serve Downtown Dania Beach, Harbor Isles, Dania Pointe, and the surrounding neighborhoods, and we can usually be on site the same day. Ask for the written scope and the moisture readings so you know exactly what is being dried.

Can fire and flood damage be restored at the same time in DANIA?

Yes, and doing them together is usually cheaper and faster. Water has to be extracted and drying started before soot work, because wet char spreads odor and mold can begin in 48 to 72 hours in Florida humidity. We sequence extraction, drying, soot removal, and odor treatment on one schedule so walls are not opened twice. Splitting the job between two companies is what causes delays.

How long does fire and flood restoration take in DANIA?

A single-room loss typically takes 1 to 2 weeks from start to final walkthrough. Structural drying alone runs 3 to 5 days, soot and char removal adds 1 to 3 days, and repairs depend on materials and permit needs. Larger losses with attic or HVAC involvement can run 4 to 6 weeks. We give you a written timeline after the first visit and update it as readings change.

!

Get Fire and Flood Restoration in DANIA, Florida today

Water is still moving through your walls right now, and every hour counts in this humidity. Call (833) 929-6186 and a crew heads your way with drying equipment on the truck. Written scope before work starts.

Call Now: (833) 929-6186